Make sure they can respond to incoming client requests on whatever port was established in the inbound connection.

Outgoing UDP packets on ports 1 to 65535.

Configure the receivers, and the network segments on which they live, to allow the following outbound traffic:.

Incoming UDP packets on ports 1 to 65535.

Configure the receivers, and the network segment on which they live, to allow the following inbound traffic:.

This typically requires 443 and RTM 19305 (UDP and TCP) to be opened.

The receiver should not be required to go through a proxy in order to connect to these services.

If you need receivers to stream content from services such as YouTube, make sure the receiver can contact those services, and stream content from them.

Receivers can make https connections to.

AP isolation and client isolation are turned off.

The receivers’ network must meet the following requirements: To connect successfully the receiver must be able to contact a DHCP server to obtain an IP address or have its IP address configured manually, and have an unfiltered routable path for traffic to the router, the internet, and any sender devices. This mode also does not support any sort of enterprise certificates. The wired connection does not work with WPA2-Enterprise/802.1X authentication.

Wired ethernet-Receivers support wired ethernet with an appropriate adapter, such as the Ethernet Adapter for Chromecast with Google TV.

One common method is to deploy the VLAN configuration IoT VLAN. If you are using a network with WPA2-Enterprise authentication for your organization, you might need to add a separate Wi-Fi access point for receiver devices with their own SSID. Receivers do not support any WPA2-Enterprise/802.1X username or password authentication.

WPA2-PSK Wi-Fi connections-Receivers are designed to work on WPA2-PSK Wi-Fi connections.

Receivers support one of the following types of network connections:

If you need to allowlist Mac addresses to connect devices to your school network, we recommend the Chromecast with Google TV (4K) that uses a stable device Mac address. For more details on how to use device MAC, see Receiver best practices.

Supported cast receiver devices include:.

For example, a Chromecast with Google TV device plugged into a TV or projector.

Cast receiver-The device to which you are casting.

For more details, see About ChromeOS device management.

For example, a managed ChromeOS device or managed Chrome browser on M108 or later. Cast sender-The device with content you want to share.

Using screencast on a polaroid tv